TDM Recording

Yes, Symphony is capable of automatically detecting and storing standard Caller ID and DTMF digits on analogue and digital extensions as well as on ISDN trunks (where available).
on 02/24/2014
Was this helpful?
Yes, it may be that you have several ISDN trunks with some independent analogue extensions that are not routed through these trunks. This is not a problem for the Symphony system as analogue, digital and trunk lines can all be recorded in the same unit.
on 02/24/2014
Was this helpful?
Yes, for areas where a recording tone must be played during calls Symphony Call Recording can be configured to play a tone on the line whilst a call is in progress. The volume, frequency and duration of the tone can be adjusted according to preference and can be enabled on a per channel basis.
on 02/24/2014
Was this helpful?
Symphony supports a wide range of PBX makes and models for analogue and digital extension types. Extra metadata may be added to recordings through one of our CTI Connectors for ease of searching and filtering. Talk to our Technical Sales Team for more information on how we can record your PBX.
on 02/18/2014
Was this helpful?
Yes. When recordings are acquired on an ISDN trunk, there is often very little metadata at the point of recording that can be added to the call in the database.The Symphony system features CTI connectors to integrate with a large range of PBX makes and models, both current and legacy. Via these integrations, the Symphony system is able to acquire extra metadata such as the agent name or unique identifier and store it in the Symphony database against the call recording. Recordings can then be filtered and searched for based on this information in Personal Assistant.Talk to our Technical Sales Team for more information on how we can integrate Symphony with your current PBX vendor.
on 02/18/2014
Was this helpful?